Whole House Filtration - Classic Series



Our MWF-WH200 classic model is designed to provide great general-purpose filtration to your house, enclosed in a UV-protected premium-grade stainless steel cover. It has been purposely designed and manufactured to suit Australian water mains and provides excellent quality water throughout your entire home. The MWF-WH200 filters sediment particles, chlorine and chlorine by-products such as THM’s, unpleasant taste, and odour.

Not only will installing the MWF-WH200 classic system improve your family’s health, but it also goes a long way towards reducing single-use plastic bottles in landfill. You'll be proud to have an environmentally friendly home with this top-quality filtration system.

Requires installation by licensed plumber. 

Please be aware the final quote is subject to onsite inspection including phase 2 installation site assessment, water, and flow testing.

Benefits:

  • Greater cost efficiency than buying bottled water

  • Reducing plastic footprint and the number of plastic bottles that end up in landfill.

  • Improve overall health and well-being by consuming great tasting fresh water

  • Softer skin and hair by reducing the drying effect of Chlorine from your shower water

  • Removal of unpleasant odours and improve taste

Cartridge Replacement Suggestion: 
MWF20-5SPP: PP 5 Micron Sediment filter to be replaced every 6 - 12 months
MWF20-T33GAC: T33 GAC filter to be replaced every 6 - 12 months
MWF20-CTO: Coconut Shell Carbon 5 Micron filter to be replaced every 6 - 12 months

Install only available in Perth Metro region

  • WaterMark WM-032240 Certified POE Whole House Filter System
  • High Flow Triple Filtration system
  • Standard Size 20” x 4.5” Big Blue Housings. Providing 100% more capacity compared to 10” x 4.5”- greater contact time, flow rates, longevity and chemical removal.
  • Suitable for Small to Large Homes with 2 or more bathrooms
  • 5 Micron PP sediment Pre-Filter for removal of fine particles, sand and rust.
  • Granular Activated Carbon (GAC) filter
  • 5 micron CTO premium coconut shell carbon filter
  • UV Resistant high grade 316 Stainless steel brackets and external cover
  • ¼” Top Mount Pressure Gauge Ports + Bleed Valve

Dimension Width: 608mm Depth: 210mm Height: 780mm
Certification WaterMark
Cartridge Size 4.5 inch X 20 Inch
Operating pressure Min Pressure 100 Max pressure 1600 kPa
Operating Temperature Min temp 4C Max temp 42C. Use on cold water line only.
Flow rate 35 LPM
Port size Standard port size 1”
Cartridge type 1st stage: 20" big blue 5 micron PP sediment
2nd stage: 20" big blue GAC filter
3rd stage: 20" CTO coconut shell carbon filter, 5 micron
Warranty 2 years
Installation Must be installed by a licensed plumber